ALL HARDWARE NOS

The STLTH starter kit is a discrete and portable pod system that offers a large collection of pod flavours. Ranging from first party STLTH pod flavours, to third party STLTH compatible pods like Allo Sync, the STLTH vape removes any flavour limitations experience on pod systems in the past

On Top of a wide variety of STLTH flavours, the STLTH device itself is equipped with a 420mAh internal battery that’s charged via a bottom micro USB port. The STLTH battery is equipped with passthrough charging, ensuring you’re able to enjoy your favourite STLTH flavours while simultaneously charging your STLTH device. Combining a tighter draw with salt nicotine, the STLTH device delivers a vape that resembles a cessation closer to traditional smoking, making it the perfect starting point for those looking to quit smoking through vaping.

STLTH Pod Collection:

• STLTH compatible pods
  

STLTH Device Features:

• 420mAh Battery
• Discreet & Portable
• Pod System Device
• Mouth to Lung Vape
• Compact Design
• Wide Variety of Flavours

Package Contains:

• 1 x STLTH Battery
• 2x 20mg Berry Blast STLTH Pods
• 1x Micro USB Charging Cable
• 1 x Instruction Manual
• 1 x Warranty Registration Card

What is STLTH Bold?

Before the Federal Government capped nicotine levels at 20mg, all STLTH pods in Canada were available in 35mg and 50mg strengths. Since the nicotine cap, STLTH has developed a hybrid nicotine that combines nic salt and freebase nicotine, delivering a similar cessation to the original 35mg and 50mg STLTH pods.

What are the best STLTH flavors?

If you’re choosing your first STLTH pod flavour, we recommend going with a taste you’re familiar with and generally enjoy. No STLTH pods are the best, as everyone’s flavour preference is different. If this is your first vape, stick with flavours you’re familiar with until you’re adjusted to your STLTH vape, then explore.

How long does a STLTH pod last?

The life of your STLTH pod will vary depending on the amount you vape. If you’re a heavy vaper, you’re looking at 1-2 days per STLTH pod. If you’re transitioning into vaping, or vaping casually, the life of your pod will extend much further.

How to refill STLTH pods?

As of right now, refillable STLTH pods do not exist. There are ways people go about refilling their STLTH pods, but we don’t recommend these methods. STLTH devices and pods are designed with single use cotton and coils, which should not be pushed beyond that. The STLTH vape is designed to the millimetre and tampering with your STLTH pods can impact the functionality and life span of your STLTH device.

What do I do with my empty stlth pods?

When returning to buy more STLTH pods, you can always return your empty pods to Vape360, where we have a STLTH disposable bin. We make sure they’re properly disposed of in an environmentally friendly way. Sadly, the reality is that most people just throw their empty STLTH pods in the garbage. 

How long does a STLTH take to charge?

The STLTH battery is 420mAh and charges through a Micro USB port. If you’re not vaping your STLTH while it’s attempting to charge, the STLTH battery will take anywhere from 45-60 minutes to charge from 0% to 100%.

The STLTH device is a discrete and portable pod system that offers a large collection of pod flavours. Ranging from first party STLTH pod flavours, to third party STLTH compatible pods like Allo Sync, the STLTH vape removes any flavour limitations experience on pod systems in the past.

On Top of a wide variety of STLTH flavours, the STLTH device itself is equipped with a 420mAh internal battery that’s charged via a bottom micro USB port. The STLTH battery is equipped with passthrough charging, ensuring you’re able to enjoy your favourite STLTH flavours while simultaneously charging your STLTH device. Combining a tighter draw with salt nicotine, the STLTH device delivers a vape that resembles a cessation closer to traditional smoking, making it the perfect starting point for those looking to quit smoking through vaping.

Please note: The STLTH Device does not include any STLTH pods. View all our STLTH compatible pods to complete your kit.

STLTH Device Features:

• 420mAh Battery
• Discreet & Portable
• Pod System Device
• Mouth to Lung Vape
• Compact Design
• Wide Variety of Flavours

Package Contains:

• 1 x STLTH Battery
• 1 x Micro USB Charging Cable
• 1 x Instruction Manual
• 1 x Warranty Registration Card

What is STLTH Bold?

Before the Federal Government capped nicotine levels at 20mg, all STLTH pods in Canada were available in 35mg and 50mg strengths. Since the nicotine cap, STLTH has developed a hybrid nicotine that combines nic salt and freebase nicotine, delivering a similar cessation to the original 35mg and 50mg STLTH pods.

What are the best STLTH flavors?

If you’re choosing your first STLTH pod flavour, we recommend going with a taste you’re familiar with and generally enjoy. No STLTH pods are the best, as everyone’s flavour preference is different. If this is your first vape, stick with flavours you’re familiar with until you’re adjusted to your STLTH vape, then explore.

How long does a STLTH pod last?

The life of your STLTH pod will vary depending on the amount you vape. If you’re a heavy vaper, you’re looking at 1-2 days per STLTH pod. If you’re transitioning into vaping, or vaping casually, the life of your pod will extend much further.

How to refill STLTH pods?

As of right now, refillable STLTH pods do not exist. There are ways people go about refilling their STLTH pods, but we don’t recommend these methods. STLTH devices and pods are designed with single use cotton and coils, which should not be pushed beyond that. The STLTH vape is designed to the millimetre and tampering with your STLTH pods can impact the functionality and life span of your STLTH device.

What do I do with my empty stlth pods?

When returning to buy more STLTH pods, you can always return your empty pods to Vape360, where we have a STLTH disposable bin. We make sure they’re properly disposed of in an environmentally friendly way. Sadly, the reality is that most people just throw their empty STLTH pods in the garbage. 

How long does a STLTH take to charge?

The STLTH battery is 420mAh and charges through a Micro USB port. If you’re not vaping your STLTH while it’s attempting to charge, the STLTH battery will take anywhere from 45-60 minutes to charge from 0% to 100%.

The follow up to the world famous Caliburn Pod System, the UWELL Caliburn G improves on a near perfect device without trying to fix things that aren’t broken. The Caliburn G Pod System features an internal 690mAh battery with 18W of power - providing longer battery life and more power for larger vaping. The Caliburn G introduces a unique airflow system that is determined based on which way your pod is inserted. For a less restricted airflow, simply place the air inlet holes on the device and the pod close together. For a more restricted airflow, simply place the pod the other way around - creating more distance between the air inlets. This allows you to adjust your airflow style based on the type of nicotine you’re using. 

Please note: The CRC version of the Caliburn G Pod System is not compatible with standard replacement coils. Replacement coils for the CRC version are built into the pods, requiring a new CRC compliant pod upon replacement.

Compatible Replacement Pods:

• UWELL Caliburn G CRC Replacement Pods

Dimensions:

• 108.3 x 22.5 x 12.6mm

Battery:

• Internal 690mAh

Charging:

• USB Type-C

eJuice Capacity:

• 1.6mL

Maximum Wattage:

• 18W

Resistance:

• 0.8ohm

Material:

• PCTG & Aluminum Alloy

Firing Modes:

• Button Activated
• Draw Activated

Lockable:

• Yes
• 5 Button Clicks

Airflow:

• Restricted MTL
• Loose DTL

Refill System:

• Top Fill
• Detachable Drip Tip

Coil System:

• CRC Compliant Pods

Package Contains:

• 1x UWELL Caliburn G Pod System
• 2x Caliburn G Replacement Pods (CRC) 0.8ohm Mesh
  
• 1x USB Type-C Cable
• 1x User Manual

Current Vuse Promotions:

The STLTH device is a discrete and portable pod system that offers a large collection of pod flavours. Ranging from first party STLTH pod flavours, to third party STLTH compatible pods like Allo Sync, the STLTH vape removes any flavour limitations experience on pod systems in the past.

This special edition STLTH Anodized device is equipped with a 420mAh internal battery that’s charged via a bottom micro USB port, all encased by a beautiful anodized metallic look. The STLTH battery is equipped with passthrough charging, ensuring you’re able to enjoy your favourite STLTH flavours while simultaneously charging your STLTH device. Combining a tighter draw with salt nicotine, the STLTH device delivers a vape that resembles a cessation closer to traditional smoking, making it the perfect starting point for those looking to quit smoking through vaping.

Please note: The STLTH Device does not include any STLTH pods. View all our STLTH compatible pods to complete your kit.

STLTH Device Features:

• 420mAh Battery
• Discreet & Portable
• Pod System Device
• Mouth to Lung Vape
• Compact Design
• Wide Variety of Flavours

Package Contains:

• 1 x Anodized STLTH Battery
• 1 x Micro USB Charging Cable
• 1 x Instruction Manual
• 1 x Warranty Registration Card

What is STLTH Bold?

Before the Federal Government capped nicotine levels at 20mg, all STLTH pods in Canada were available in 35mg and 50mg strengths. Since the nicotine cap, STLTH has developed a hybrid nicotine that combines nic salt and freebase nicotine, delivering a similar cessation to the original 35mg and 50mg STLTH pods.

What are the best STLTH flavors?

If you’re choosing your first STLTH pod flavour, we recommend going with a taste you’re familiar with and generally enjoy. No STLTH pods are the best, as everyone’s flavour preference is different. If this is your first vape, stick with flavours you’re familiar with until you’re adjusted to your STLTH vape, then explore.

How long does a STLTH pod last?

The life of your STLTH pod will vary depending on the amount you vape. If you’re a heavy vaper, you’re looking at 1-2 days per STLTH pod. If you’re transitioning into vaping, or vaping casually, the life of your pod will extend much further.

How to refill STLTH pods?

As of right now, refillable STLTH pods do not exist. There are ways people go about refilling their STLTH pods, but we don’t recommend these methods. STLTH devices and pods are designed with single use cotton and coils, which should not be pushed beyond that. The STLTH vape is designed to the millimetre and tampering with your STLTH pods can impact the functionality and life span of your STLTH device.

What do I do with my empty stlth pods?

When returning to buy more STLTH pods, you can always return your empty pods to Vape360, where we have a STLTH disposable bin. We make sure they’re properly disposed of in an environmentally friendly way. Sadly, the reality is that most people just throw their empty STLTH pods in the garbage. 

How long does a STLTH take to charge?

The STLTH battery is 420mAh and charges through a Micro USB port. If you’re not vaping your STLTH while it’s attempting to charge, the STLTH battery will take anywhere from 45-60 minutes to charge from 0% to 100%.

The Uwell Caliburn A2 Pod Kit is the latest addition to the beloved Uwell Caliburn family. Capable of firing up to 15W by draw or button activation, the Caliburn A2 is powered by a 520mAh internal battery and Type-C charging. The 2mL refillable pods on the Caliburn A2 are equipped with magnetic connection, a leak proof design, and a viewing window to help avoid dry hits.

Designed to be compact and powerful, the Uwell Caliburn A2 Pod System is the perfect on-the-go vaping device for beginners or veterans.

Compatible Replacement Pods:

• Uwell Caliburn A2 0.9ohm Replacement Pods
  

Dimensions:

• 110.1 x 21.3 x 11.7mm
  

eJuice Capacity:

• 2mL
  
• eJuice Check Window
  

Battery:

• Internal 520mAh
  

Firing Mode:

• Direct Draw
  
• Button Activated
  

Charging:

• Type-C
  

Maximum Wattage Output:

• 15W
  

Indicator Light:

• LED
  

Construction:

• Aluminium Alloy
  

Coil Type:

• FeCrAl UN2 Meshed-H 0.9ohm
  

Refill System:

• Top Filling
  

Package Contains:

• 1x Uwell Caliburn A2 Device
  
• 2x Uwell Meshed-H 0.9ohm Replacement Pods
  
• 1x User Manual

The Allo Sync Pod System combines the much loved Allo Disposable eJuice flavours with a regulated device that harnesses an internal 450mAh battery. Each Alloy Sync Replacement Pod is designed with a mesh coil and S-Compatiblity to allow for use on multiple devices, such as the STLTH Pod System. The Allo Sync Device itself is equipped with a LED battery indicator and Type-C quick charging to ensure you're never left with a dead battery.

Please note: The Allo Sync Device Kit does not included any pods. You can purchase Allo Sync Replacement Pods, or the Allo Sync Starter Kit if you're looking for replacement pods.

Compatible Pods:

• Allo Sync Replacement Pods
  
• STLTH Replacement Pods
  

Allo Sync Features:

• Designed to Prevent Leaks & Spit Back
  
• S-Compatible Replacement Pods (Sold Separately)
  
• Internal 450mAh Battery
  
• LED Battery Indicator
  
• Type-C Quick Charge
  
• Colour Coded O-Ring to Identify Flavours
  

• 1 x Allo Sync Closed Pod System Device
• 1 x Type C Charging Cable
• 1 x Instructions

The VooPoo Drag X delivers a compact, powerful, and easy-to-use vaping experience from beginning to end. Utilizing the GENE.TT chipset, the VooPoo Drag X Starter Kit offers 80W of power, adjustable wattage, and a colour LED screen. Compatible with a single 18650 battery, the VooPoo Drag X allows for easy swapping of batteries to ensure you’re never left without power. All of the power and design elements that you’ve come to love from VooPoo can now be found in one device - The Drag X Mod Pod Starter Kit.

Please note: The VooPoo Drag X requires a single 18650 battery that’s not included.

Dimensions:

• 92 x 32.5 x 28mm

Firing System:

• Draw Activated

Chipset:

• GENE.TT

Output Wattage:

• 5 - 80W

Output Voltage:

• 3.2 - 4.2V

Resistance Range:

• 0.1 - 3.0ohms

Display:

• Colour OLED
• Battery Level
• Power Level
• Voltage
• Wattage
• Ohm Level
• Puff Counter

Material:

• Alloy + Leather

eJuice Capacity:

• 4.5mL

Battery:

• Single 18650 (not included)

Charging:

• USB Type-C

Package Contains:

• 1x Drag X Device
• 1x Drag X Pod
• 1x PnP-VM6 Coil
• 1x PnP-VM1 Coil
• 1x Warning Card
• 1x GENE.TT Chip Card
• 1x User Manual
• 1x USB Type-C Charging Cable

The Allo Sync Pod System combines the much loved Allo Disposable eJuice flavours with a regulated device that harnesses an internal 450mAh battery. Each Alloy Sync Replacement Pod is designed with a mesh coil and S-Compatiblity to allow for use on multiple devices, such as the STLTH Pod System. The Allo Sync Device itself is equipped with a LED battery indicator and Type-C quick charging to ensure you're never left with a dead battery.

Compatible Pods:

• Allo Sync Replacement Pods
  
• STLTH Replacement Pods
  

Allo Sync Features:

• Designed to Prevent Leaks & Spit Back
  
• S-Compatible Replacement Pods (Sold Separately)
  
• Internal 450mAh Battery
  
• LED Battery Indicator
  
• Type-C Quick Charge
  
• Colour Coded O-Ring to Identify Flavours
  

• 1 x Allo Sync Closed Pod System Device
• 1 x Allo 20mg Blue Raspberry Replacement Pod
• 1 x Allo 20mg Pineapple Ice Replacement Pod
• 1 x Allo 20mg Frost Replacement Pod
• 1 x Type C Charging Cable
• 1 x Instructions

The GeekVape Aegis X Box Mod delivers 200W of power, unmatched durability with a shockproof and IP67 waterproof and dust-proof system, along with a dual 18650 battery compatibility. Combining a large 2.4” OLED display and the new AS 2.0 chipset, you’ll find an accurate read out of resistance, amps, voltage, puff counter, and battery life indicator. Complete with a Temperature Control Suite, the GeekVape Aegis X Box Mod covers durability, power, and design in one beautiful box mod.

Please note: The GeekVape Aegis X Box Mod requires two 18650 batteries that are not included. If you're unsure of which batteries are required to operate this device, please contact us.

Dimensions:

• 128.9 x 31.5 x 41.2mm

Wattage Range:

• 5 - 200W

Input Voltage:

• 6.2 - 8.4V

Output Voltage:

• 0.1 - 12V

Resistance Range:

• 0.05 - 3ohm

Temperature Control Suite:

• Stainless Steel
• Nickel200
• Titanium

Temperature Control Range:

• 100 - 315C (200 - 600F)

Proofing:

• Military Standard 810G-516.6 Shockproof System
• IP67 Water Proof and Dustproof System

Modes:

• Powerful
• Standard
• Soft

Charging:

• 5V/2A

Chipset:

• AS 2.0

Display:

• 2.4” OLED
• 5 Colour Choices

Battery:

• 2x 18650 (Not Included)

Connection:

• 510

Protections:

• 10S Cut-Off
• Short Circuit
• Over Charging
• Discharging
• Over-Heat
• Over-Current
• Anti-Dry (Temperature Control Only)

Package Contains:

• 1x GeekVape Aegis X Mod
• 1x USB Cable
• 1x User Manual

Temperature Control Mode is designed for advanced users. Please make sure you're using the correct coil and settings for Temperature Control mode, as not following proper usage instructions can be dangerous. If you have any questions, please feel free to contact us to ensure safe vaping.

The SMOK Novo 4 Pod System is the latest edition to the beloved SMOK Novo family of open pod systems. Equipped with an 800mAh internal battery that’s powered by a 0.74A Type C charging format, the SMOK Novo 4 boasts massive flavour with a quick recovery time. Maintaining the small and ergonomic feel from previous SMOK Novo devices, the SMOK Novo 4 achieves a great hand feel without compromising power. Capable of firing between 5 - 25W, the SMOK Novo 4 Pod System can be used as a MTL or DTL device - depending on your preference. By combining an adjustable air inlet system with the new SMOK LP1 Replacement Coils, finding your perfect vaping experience has never been easier than with the SMOK Novo 4.

Compatible Replacement Coils:

• SMOK LP1 Replacement Coils
  

Compatible Replacement Pod:

• SMOK Novo 4 2mL Replacement Pod
  

Dimensions:

• 93.5 x 17.7 x 26.5mm
  

Battery:

• Internal 800mAh
  

eJuice Capacity:

• 2mL
  

Wattage Range:

• 5 - 25W
  

Input Voltage:

• 3.3 - 4.2V
  

Output Voltage:

• 0.5 - 4.0V
  

Resistance Range:

• 0.4 - 3.0ohm
  

Charging Type:

• Type C
  
• Max 0.74A Charging Current
  

Airflow:

• Adjustable Air Inlet Ring
  

Package Contains:

• 1x SMOK Novo 4 Device
  
• 1x SMOK Novo 4 Pod
  
• 1x SMOK LP1 Meshed 0.8ohm Replacement Coil
  
• 1x SMOK LP1 DC 0.8ohm MTL Replacement Coil
  
• 1x Type-C Cable
  
• 1x User Manual

The SMOK Rigel 230W Starter Kit delivers power, flavour, and convenience right out of the box. Powered by two external 18650 batteries (sold separately), the SMOK Rigel Mod offers up 230W of power with a firing speed of 0.001S. Equipped with a 0.96” TFT Colour display, the SMOK Rigel clearly displays all the information needed to achieve a full flavoured vaping experience, while the Type-C charging port brings quick 2A charging making recharging your batteries less painful.

Also included in the the SMOK Rigel 230W Starter Kit is the brand new SMOK TFV9 Sub-Ohm Tank! Keeping true to the SMOK TFV family, the SMOK TFV9 Tank brings massive flavour with a large eJuice capacity of 6.5mL. Equipped with a childproof cap and a top refill system, the SMOK TFV9 is convenient and safe. Introducing a new family of SMOK coils, the SMOK TFV9 Tank is compatible with the brand new SMOK TFV9 Meshed Coil, which combines a kanthal mesh material and a 0.15ohm resistance that delivers large flavour and huge vapor production.

Please note: The SMOK Rigel 230W Mod required 2x 18650 batteries to power. If you’re unsure of which batteries are required to operate this device, please contact us.

Compatible Coils:

• SMOK TFV9 Meshed Replacement Coils

Dimensions:

• 44 x 28.8 x 88mm

Maximum Output Wattage:

• 1 – 230W

Resistance Range:

• 0.1 – 2.5ohm

Input Voltage:

• 6.4 – 8.4V

Output Voltage:

• 1 – 8.2V

Battery:

• 2x 18650 *not included*

Charging:

• Type-C
• Max 2A Current

Firing Speed:

• 0.001S

Display:

• 0.96” TFT Colour

Protections:

• Intelligent Atomizer Recognition
• Puff Monitoring System
• 8 Second Cut-Off
• Short Circuit Protection
• Over Heating Protection
• Low Battery Warning

SMOK TFV9 Tank:

Dimensions:

• 28 x 56mm

eJuice Capacity:

• 6.5mL

Thread:

• 510 Gold Plated

Airflow:

• Bottom Adjustable

Refill System:

• Top Fill
• Childproof Top Cap

Package Contains:

• 1x SMOK Rigel 230W Mod
• 1x SMOK TFV9 Sub-Ohm Tank (6.5mL)
• 2x SMOK V9 Meshed 0.15ohm Replacement Coil
• 1x Replacement Glass
• 1x Type-C Charging Cable
• 1x User Manual

The VooPoo PnP Pod Tank features a 4.5mL or 2mL (CRC) eJuice capacity with a bottom refill system that reduces eJuice spills and messes. Compatible with the VooPoo PnP Replacement Coil family, the PnP Pod Tank brings massive selection to for your vaping style and needs.

Please note: The VooPoo PnP Pod Tank is sold individually.

Compatible Coils:

• VooPoo PnP Replacement Coils

Compatible Mods:

• VooPoo Drag X 80W Mod Pod Starter Kit
• Any 510 Threaded Device

Diameter:

• 26mm

eJuice Capacity:

• 4.5mL (Regular)
• 2mL (CRC)

Refill System:

• Bottom Refill

Coil System:

• Bottom Press Fit Installation

Airflow:

• Adjustable Dual Bottom

Connection:

• Threaded 510

Package Contains:

• 1x VooPoo PnP Pod Tank

The Voopoo Drag X Plus Mod utilizes the Gene.Fan 2.0 Chipset by Voopoo to deliver a powerful vaping experience with half of the maintenance required on other vaping devices. Equipped with a Smart Mode, the Voopoo Drag X Plus allows you to simply drop in your magnetic pod and start vaping - the device itself will set proper wattage. If you’re not satisfied, the Voopoo Drag X Plus contains two protruding adjustment buttons for you to take control of the wattage. Also equipped with a 510 threading and a RBA mode, the Voopoo Drag Plus can be paired with any 510 threaded tank or rebuildable atomizer. Powered by a single 18650 or 21700 battery, the Voopoo Drag X Plus is capable of firing between 5 - 100W of power. 

The included Voopoo TPP Pod Tank is 510 threaded to allow switching between devices, or vice versa, when the situation calls for it. Compatible with the Voopoo TPP Coil family, the Voopoo TPP Pod Tank delivers phenomenal flavour and versatility for your vaping style. Easily refilled through the bottom silicone plug and allowing airflow control, the Voopoo TPP Pod Tank completes this one of a kind starter kit.

Please note: The VooPoo Drag X Plus Starter Kit requires a single 18650 or 21700 battery that’s not included. If you’re unsure of which battery is required, please contact us.

Compatible Coils:

• VooPoo TPP Mesh Replacement Coils
  

Compatible Pods:

• VooPoo TPP Replacement Pods

Dimensions:

• 141 x 35 x 29mm
  

Maximum Wattage Range:

• 5 - 100W
  

Maximum Voltage Range:

• 0.1 - 3.0ohm
  

Battery:

• Single 18650 (Sold Seperately)
  
• Single 21700 (Sold Seperately)
  

Charging:

• Type C
  

Chipset:

• GENE.FAN 2.0
  

Firing Modes:

• Smart Mode
  
• RBA Mode
  

Construction:

• Zinc Alloy 
  
• Leather
  

Display:

• 0.96” TFT Colour
  

Protections:

• Overtime
  
• Short-Circuit
  
• Overcharge
  
• Overcurrent
  
• Over Discharge
  
• Over Temperature
  
• Max Power
  
• Battery Reverse
  

Voopoo TTP Pod Tank:

eJuice Capacity:

• 5.5mL
  

Refill System:

• Bottom Fill
  
• Silicone Stopper
  

Coil System:

• Press Fit Coil Installation
  

Airflow:

• Dual Slot
  
• Adjustable Airflow Ring
  

Connection:

• Threaded 510
  

Package Contains:

• 1x VooPoo Drag X Plus Device
  
• 1x VooPoo PP Pod Tank (5.5mL)
  
• 1x 0.15ohm VooPoo TPP-DM1 Coil
  
• 1x 0.2ohm VooPoo TPP-DM2 Coil
  
• 1x Type C Charging Cable
  
• 1x User Manual

The Freemax Twister 30W Starter Kit utilizes a bottom dial that allows for wattage adjustment between 7.5-30W, adjusting in increments of 2.5W. Equipped with the Twister 30W is the Freemax Fireluke 22 Tank, which allows for MTL or DTL vaping styles. The Fireluke 22 Tank utilizes a leak proof system that allows you to change your coils when your tank is still full of eJuice. Capable of holding 3.5mL of eJuice, the Fireluke 22 Tank is great tank for beginners or veterans!

Compatible Coils:

• Freemax Fireluke 22 Mesh Replacement Coils

Dimensions:

• 78.3 x 22mm

Maximum Wattage Output:

• 7.5 - 30W

Maximum Resistance Range:

• 0.5 - 3.0ohm

Maximum Voltage Output:

• 1.9 - 7.5V

Wattage Adjustment Method:

• Twistable Dial Wheel

Battery:

• Internal 1400mAh

eJuice Capacity:

• 3.5mL

Refill System:

• Child Resistant Top Fill
• Anti Leak System
• Replace Coils with Full Tank

Airflow:

• Adjustable Bottom Ring

Charging:

• MicroUSB

Protections:

• Open Circuit Protection
• Overload Protection
• Short-Circuit Protection
• Over-Heat Protection
• Low Voltage Protection
• Over Discharge Protection
• Overcharge Protection
• Over-Time Protection

Includes:

• 1x Freemax Twister 30W Mod
• 1x Freemax Fireluke 22 Tank
• 1x 2mL Replacement Glass
• 1x 0.5ohm DTL Mesh Replacement Coil
• 1x 1.5ohm MTL Mesh Replacement Coil
• 1x 510 DTL Replacement Drip Tip
• 1x 510 MTL Replacement Drip Tip
• 1x O-Ring Pack
• 1x USB Cable
• 1 User Manual

The SMOK Nord 50W Pod System delivers a new standard in the SMOK Nord family! Introducing the SMOK LP2 Coils, the SMOK Nord 50W includes a new LP2 pod that’s compatible with the leakproof LP2 Replacement Coil Family. Equipped with an internal 1800mAh battery, the SMOK 50W Pod System is capable of firing at 50W for increased flavour and cloud production, while being charged quickly with Type C charging. Keeping with the dual adjustable air inlet design, the SMOK Nord 50W can be adjusted to suit your style of airflow for a customized vaping experience. Refillable through a side slot silicone plug, the SMOK Nord 50W focuses on not only power and customization, but convenience as well.

Compatible Pods & Coils:

• Nord 50W LP2 Pod
  
• Compatible with LP2 Replacement Coils
  
  
• Nord 50W Nord Pod
  
• Compatible with Nord Replacement Coils
  
  
• Nord 50W RPM Pod (Not Included)
  
• Compatible With RPM Replacement Coils 

Dimensions:

• 31x22.6x97mm (Regular Series)
  
• 32x23.9x98mm (Leather Series)
  

Battery:

• Internal 1800mAh
  

Compatible Pods:

• Nord 50W LP2 Pod
  
• Compatible with LP2 Replacement Coils
• Nord 50W Nord Pod
  
• Compatible with Nord Replacement Coils
• Nord 50W RPM Pod (Not Included)
  
• Compatible With RPM Replacement Coils 

Maximum Output Wattage:

• 5 - 50W
  

Maximum Output Voltage:

• 0.5 - 4.0V
  

Resistance Range:

• 0.2 - 3.0ohm
  

Airflow:

• Dual Adjustable Air Intakes
  

Fill System:

• Side Fill
  
• Silicone Plug
  

Display:

• OLED
  

Charging:

• Type-C
  

Protections:

• Atomizer Recognition
  
• Lithium-ION Protection
  
• Low Voltage
  
• 8 Second Cutoff
  
• Over Temperature
  
• Short Circuit
  

Package Contains:

• 1x SMOK Nord 50W Device
  
• 1x SMOK Nord 50W LP2 4mL Pod
  
• 1x SMOK LP2 Meshed 0.23ohm DL Replacement Coil
  
• 1x SMOK Nord 50W Nord 4.5mL Pod
  
• 1x SMOK Nord Regular DC 0.6ohm Replacement Coil
  
• 1x Type-C Cable
  
• 1x User Manual

The SMOK ARCFOX 230W Mod is crafted with performance and efficiency at the forefront! Powered by two 18650 batteries, the SMOK ARCFOX Mod is equipped with 230W of power with a full temperature control suite. Monitoring all your adjustments is made clear and simple with the 0.96" TFT display and two protruding adjustment buttons.

Included in the SMOK ARCFOX Starter Kit is the SMOK TFV18 Sub Ohm Tank, which equipped with a large 7.5mL eJuice capacity, adjustable airflow, and meshed coils. Delivering profound flavour and cloud production, the SMOK TFV18 Tank is an all in one tank from beginning to end.

Please note: The SMOK ARCFOX Starter Kit requires 2x 18650 batteries that are not included. If you're unsure which batteries are required to power this device, please contact us.

Compatible Coils:

• SMOK TFV18 Replacement Coils

SMOK ARCFOX Mod Specifications:

Dimensions:

• 88.25 x 55.6 x 30mm

Maximum Wattage Output:

• 5 - 230W
  

Maximum Output Voltage:

• 0.5 - 8.2V
  

Resistance Range:

• V/W: 0.1 - 2.5ohm
• TC: 0.05 - 2ohm

Temperature Range:

• 200 - 600F (100 - 315C)
  

Battery:

• 2x 18650 (Sold Separately)

Display:

• 0.96" TFT
  

IP67 Rating:

• Dustproof
  
• Shockproof
  
• Waterproof

SMOK TFV18 Tank Specifications:

Dimensions:

• 31.6 x 66.3mm

eJuice Capacity:

• 7.5mL
  

Thread:

• 510
  

Construction:

• Stainless Steel
  

Package Contains:

• 1 x SMOK ARCFOX Mod
  
• 1 x SMOK TFV18 Tank (7.5mL)
  
• 1 x SMOK TFV18 Meshed 0.33ohm Replacement Coil
  
• 1 x SMOK TFV18 Dual Meshed 0.15ohm Replacement Coil
  
• 1 x Replacement Bulb Glass
  
• 1 x Type-C Charging Cable
  
• 1 x User Manual
  

The Uwell Caliburn AK2 Pod System is the latest edition to the wildly popular Caliburn line of pod systems. Powered by a 520mAh internal battery and Type-C charging, the Uwell Caliburn AK2 is capable of firing at up to 15W with the ability to fully charge in under 1 hour. Compatible with the Uwell Caliburn A2 and AK2 Replacement Pods, the Uwell Caliburn AK2 has been upgraded with an eJuice window, so you’re never unexpectedly left with an empty pod. Keeping with the Caliburn style of refill system, simply pop off the ergonomic mouthpiece to expose the refill slot.

Compatible Replacement Pods:

• Uwell Caliburn A2 Replacement Pods
  

Dimensions:

• 43.5 x 11.8 x 67.9mm
  

Battery:

• Internal 520mAh
  

Maximum Wattage Output:

• 15W
  

eJuice Capacity:

• 2mL
  

Firing System:

• Draw Activated
  

Weight:

• 35g
  

Refill:

• Top Fill
  
• Removable Mouthpiece
  

Charging:

• Type-C
  

Coil Specifications:

• Caliburn A2 & AK2 Replacement Pods
  

Package Contains:

• 1x Uwell Calibrun AK2 Pod System
  
• 2x Meshed-H 0.9ohm Replacement Pods
  
• 1x Silicone Lanyard
  
• 1x User Manual

The Voopoo Drag 3 incorporates the Voopoo GENE.FAN 2.0 chipset that offers various operation modes that satisfies vaping between 5 - 177W. The latest addition to the Drag family, the Drag 3 Mod is made from zinc-alloy and leather with a high quality hand feel, while providing a complete vaping experience with Smart & Bypass modes that’s powered by 2x 18650 batteries. 

The included Voopoo TPP Pod Tank is 510 threaded to allow switching between devices, or vice versa, when the situation calls for it. Compatible with the Voopoo TPP Coil family, the Voopoo TPP Pod Tank delivers phenomenal flavour and versatility for your vaping style. Easily refilled through the bottom silicone plug and allowing airflow control, the Voopoo TPP Pod Tank completes this one of a kind starter kit.

Compatible Coils:

• Voopoo TPP Mesh Replacement Coils
  

Replacement Pods:

• Voopoo TPP Replacement Pods
  

Please note: The Voopoo Drag 3 Mod requires 2x 18650 batteries that are not included. If you're unsure of which batteries are required, please contact us.

Maximum Wattage Output:

• 5 - 177W
  

Maximum Voltage Output:

• 6.4 - 8.4V
  

Maximum Resistance:

• 0.1 - 3.0ohm
  

Battery:

• 2x 18650 Battery (Sold Seperately)
  

Material:

• Leather
  
• Zinc Alloy
  

Firing Modes:

• Bypass Mode
  
• Smart Mode
  

Protections:

• Overtime
  
• Short Circuit
  
• Overcharge
  
• Output Over Current
  
• Over Discharge
  
• Over Temperature
  
• Balance Charge
  
• Battery Reverse
  

Charging:

• Type C
  
• 5V/2A
  

Chipset:

• GENE.FAN 2.0
  

Connection:

• 510 Threaded
  

Voopoo TPP Pod Features:

eJuice Capacity:

• 5.5mL
  

Material:

• PCTG
  

Refill:

• Bottom Fill
  
• Rubber Plug
  

Connection:

• 510 Threaded
  

Package Contains:

• 1x Voopoo Drag 3 Mod
  
• 1x Voopoo TPP Pod (5.5mL)
  
• 1x Voopoo TPP DM2 0.2ohm Replacement Coil
  
• 1x Voopoo TPP DM1 0.15ohm Replacement Coil
  
• 1x Type C Charging Cable
  
• 1x User Manual

The GeekVape Aegis Mini 2 brings the second generation of tri-proof protection to a compact, portable, and down right beautifully designed vaping mod. The IP68 rating ensures that the Aegis Mini 2 Mod is resistant to water, dust, and shock - covering you from accidental drops or weather changes. Powered by an internal 2500mAh battery, the Aegis Mini 2 Mod is capable of firing up to 100W while delivering all day battery life. Equipped with a new A-Lock design, the Aegis Mini 2 by GeekVape features a vertical switch on the side of the mod’s chassis that allows users to simply swipe up or down to protect from over burning coils or over heating the device while it’s not in use.

Dimensions:

• 39.3 x 136.5mm
  

Maximum Wattage Output:

• 100W
  

Maximum Voltage Output:

• 8.5V
  

Resistance Range:

• 0.1 - 3.0ohm
  

Proofing:

• IP68 Rating
  
• Tri-Resistance (Water, Dust & Shock)
  

Battery:

• Internal 2500mAh
  
• Type-C Charging
  

Firing Modes:

• VW (Variable Wattage)
  
• VPC
  
• Bypass
  
• Stealth Mode
  

Display:

• 1.08” Screen
  
• Colour Display
  
• Full Readout
  

Connection:

• 510 Thread
  

Package Contains:

• 1x GeekVape Aegis Mini 2 Mod
  
• 1x Type-C Charging Cable
  
• 1x Manual
  

The HorizonTech Sakerz Sub-Ohm Tank features a 5mL eJuice capacity with a dual top slotted airflow system that delivers enhanced flavour and vapor production. Utilizing a threaded top fill system, the HorizonTech Sakerz Tank allows for easy, childproof refills on the go. The Sakerz Tank is compatible with new press fit mesh coils that are rated at 0.16ohm and 0.17, providing rapid heating and flavour production.

Replacement Coils:

• HorizonTech Sakerz Replacement Coils
  

Diameter:

• 29.5mm
  

eJuice Capacity:

• 5mL Bubble Glass
  
• 3.5mL Standard Class
  

Refill:

• Top Fill System
  
• Dual Filling Ports
  
• Threaded
  

Airflow:

• Top Airflow System
  
• Dual Slotted
  

Drip Tip:

• Widebore 810 Drip Tip
  

Connection:

• 510 Threaded
  

Material:

• Superior 304 Stainless Steel
  
• Pyrex Glass
  

Package Contains:

• 1x HorizonTech Sakerz Tank
  
• 1x 0.16ohm Mesh Replacement Coil
  
• 1x 0.17ohm 2 in 1 Mesh Replacement Coil
  
• 1x Tool Kit
  
• 1x 3.5mL Replacement Standard Glass
  
• 1x User Manual
  
• 1x Warranty Card

The Nord Pro pod system is the latest addition to the SMOK Nord line of vape mods. Following the SMOK Nord format, the SMOK Nord Pro is designed with a sleek feel and portable size. Resembling the beauty of the Nord 4, the SMOK Nord Pro features a sleek and portable design that feels comfortable in your hand, but compact enough to carry in your pocket. The latest SMOK pod system, the SMOK Nord Pro features an auto draw or button triggered firing system that can be switched by clicking the single Nord Pro button 3 times in succession. The included 3.3mL child resistant pod on the SMOK Nord Pro delivers two airflow variants depending on the direction the pod is installed. You can simply change the installation direction of the Nord Pro pod to deliver the classic SMOK pod system draw, or a tighter, more restricted vape.

Included with the SMOK Nord Pro pod system is the brand new SMOK Nord Pro meshed 0.9ohm MTL coil, and the SMOK Nord Pro Meshed 0.6ohm DL coil. Adding a coil for freebase and nic salt vapers, the SMOK Nord Pro makes sure coil options are readily available to suit your style of vaping.

Compatible Coils:

• SMOK Nord Coils
  

SMOK Nord Pro Pod System Specifications

Dimensions:

• 96 x 18.9 x 29mm
  

Battery Capacity:

• 1100mAh
  

Wattage Range:

• 2-25W
  

Resistance Range:

• 0.6 - 3.0ohm
  

Input Voltage:

• 3.3-4.2V
  

Output Voltage:

• 3-4V
  

Charging:

• 0.7A
  
• Type-C
  

eJuice Capacity:

• 3.3mL Pod
  
• Child Resistance Pod
  

Firing Modes:

• Button Activated Draw
  
• Auto Draw
  
• Triple click power button to switch modes

Airflow:

• Pod Directional Airflow
  

Protections:

• Pod Detection
  
• Short Circuit Protection
  
• 8s Cut Off Timer
  
• Low Voltage Protection
  

Package Contains:

• 1x SMOK Nord Pro Device
  
• 1x SMOK Nord Pro 3.3mL Pod
  
• 1x SMOK Nord Pro Meshed 0.6ohm DL Coil (Freebase)
  
• 1x SMOK Nord Pro Meshed 0.9ohm MTL Coil (Salt Nic)
  
• 1x Type-C Charging Cable
  
• 1x User Manual
  

The VooPoo Drag X Plus Pro vape mod is the latest edition to the Drag X family, with noticeable upgrades to the Drag X box mod and VooPoo TPP Pod Tank. Powered by a single 18650 or 21700 battery, the Drag X Plus Pro mod is capable of firing up to 100W in RBA or Smart mode. Equipped with the latest VooPoo Gene.Fan.2.0 chipset, the VooPoo Drag X Pro Plus box mod brings deeper customization to your vape mod. Offering new Core and Iron modes, the Drag X Pro Plus 0.96” TFT display can now be displayed horizontally or vertically, without sacrificing precious readouts that maximize your vaping experience.

Included in the VooPoo Drag X Plus Pro Starter Kit is the latest pod tank from VooPoo, the TPP Pod Tank. Featuring a 5.5mL eJuice capacity with a removable 810 drip tip, the TPP Pod Tank delivers the same great flavour with upgrades to comfort and customization. Keeping with the features we’ve come to love from the Drag X series of vape mods, the TPP Pod Tank features a magnetic suction pod that incorporates a new leakproof technology to ensure your vape juice is never wasted, and your Drag X Plus Pro mod remains clean.

With features that stand with the best vape mods or pod systems available, the VooPoo Drag X Plus Pro vape combines power, convenience, and style into one easy to use vape mod.

Please note: The VooPoo Drag X Plus Pro mod requires a single 18650 or 21700 battery that's not included.

Voopoo Drag X Pro Plus Box Mod Specifications:

Box Mod Dimensions:

• 140 x 35 x 28mm
  

Battery Required:

• Single 18650 Vape Battery (sold separately)
  
• Single 21700 Vape Battery (sold separately)
  

Maximum Wattage Output:

• 5-100W
  

Maximum Input Voltage:

• 3.2 - 4.2V
  

Maximum Output Voltage:

• 8.5V
  

Mod Resistance Range:

• 0.1-3.0ohms
  

Chipset:

• GENE.Fan.2.0
  
• 0.001 Firing Speed
  
• Dynamic Stable Output
  

Display:

• 0.96” TFT Colour Display
  
• Core Mode (Horizontal)
  
• Iron Mode (Vertical)
  

Vaping Modes:

• Smart Mode
  
• RBA Mode
  

Box Mod Material:

• Zinc Alloy
  
• Leather
  

Charging:

• Type C Fast Charging
  

Protections:

• Overtime
  
• Short Circuit
  
• Overcharge
  
• Output Over Current
  
• Over Discharge
  
• Over Temperature
  
• Max Power
  
• Battery Reverse
  

VooPoo TPP Pod Tank Specifications:

eJuice Capacity:

• 5.5mL
  

Pod Type:

• Magnetic Suction Pod
  

Vape Tank Material:

• Zinc Alloy
  
• PCTG
  

Drip Tip:

• Removable 810 Drip Tip
  
• Leak Proof Technology
  

Connection:

• 510 
  

Package Contains:

• 1x VooPoo Drag X Plus Pro Vape Mod
  
• 1x VooPoo 5.5mL TPP Pod Tank 
  
• 1x VooPoo TPP DM1 0.15ohm Coil
  
• 1x VooPoo TPP DM2 0.2ohm Coil
  
• 1x Type C Charging Cable
  
• 1x User Manual